Table of Contents
Advertisement
(9)
Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output.
connector power up the system when a wake up signal is received through the LAN
card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(10) FAN Speed Headers (3-pin) : FAN1, FAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
PW BN
IDELED
Speaker
System Case Connections
WOL
1
3
Wake-On-LAN Headers
1
CPUFAN
3
1
3
FAN2
1
3
FAN1
17
This
Advertisement
Table of Contents
