Pm Wake Up Events - JETWAY P4XFAR5A User Manual

Video off Method
MODEM Use IRQ
Power Button Function
Power After Power Failure
> Wake Up Events
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend →
off, All Modes → Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
Wake Up Events
Please refer to section 3-8-1
3-8-1 Wake up Events
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
VGA
LPT & COM
V/H SYNC+Blank
3
Instant-Off
Off
Press Enter
F6:Optimized Defaults
Initial display power management signaling.
This option only writes blanks to the video buffer.
horizontal synchronization ports and write blanks to the video
buffer.
Wake Up Events
OFF
LPT/COM
31
Menu Level >
F1:General Help
F7:Standard Defaults
Item Help