Miscellaneous Control - JETWAY K8M8MSR1A User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CPU Ratio
Auto Detect PCI Clk
Spread Spectrum
CPU Voltage
*** Current Host Frequency is 200MHz ***
CPU Clock at Next Boot is
*** Current DRAM Frequency is 200MHz ***
DRAM Clock at next Boot is
CPU Vcore
Over Voltage
VRAM Output
VAGP Output
VCC1.2V Voltage
VCC2.5V Voltage Select
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing.
The choice are: 200MHz∼300MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V,
2.8V.
VCC2.5V Voltage Select
This item allows you to select 2.5V of the VCC2.5V Voltage. The choice are: 2.5V, 2.6V.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
F6:Optimized Defaults
Default
Enabled
Disabled
Default
201MHz
201MHz(By SPD)
Default
Enabled
2.5V(Default)
1.6V
1.2V
2.5V
F7:Standard Defaults
34
Item Help
Menu Level >
F1:General Help