Specification - JETWAY 915GCPR2A User Manual

1-2 Specification

Spec
Design
Chipset
CPU Socket
(LGA 755 Socket)
Memory Socket
Expansion Slot &
Headers
Integrate IDE
Integrate VGA
(for 915GCP/915GC
only)
LAN On Board
(for 915GCP/915PCP
only)
Audio
BIOS
Multi I/O
∗ ATX form factor 4 layers PCB size: 30.5x24.5cm
∗ Intel 915G Graphics Memory Controller Hub (GMCH) Chipset
for 915GCP/915GC
∗ Intel 915P Memory Controller Hub (MCH) Chipset for
915PCP/915PC
∗ Intel 82801FB I/O Controller Hub (ICH6) Chipset
∗ Support Intel Pentium 4 755-Land LGA Package utilizes Flip-
Chip Land Grid Array (FCLGA4) package processor
∗ Support CPU Frequency 533MHz/800MHz
∗ Support 2.8G/3.0G/3.6G LGA 755 Pentium 4 processor
∗ Reserves support for future Intel Pentium 4 processors
∗ 184-pin DDR SDRAM module socket x4
∗ Support Dual channel DDR333/DDR400 DDR SDRAM
∗ Expandable to 4.0GB
∗ One PCI Express x16, two PCI Express x1 Slots
∗ 32-bit PCI slot x 4
∗ One IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100 functions that
deliver the data transfer rate up to 100 MB/s
∗ Four Serial ATA Host controllers, that deliver the data transfer
rate up to 150 MB/s
∗ 400MHz Integrated 24-bit RAMDAC up to 2048x1536@75 Hz
∗ Multiplexed Digital Display Channels (Support with ADD2
Card (Advanced Digital Display)
∗ Realtek PCI Interface Ethernet controller
∗ Supports 10/100Mb/sec data transfer rate
∗ Realtek ALC880 8-channel High Definition Audio Codec
integrated
∗ Support 8-channel 3D surround & Positioning Audio
∗ SPDIF-In/ SPDIF-Out Optical support (Cable optional)
∗ Audio driver and utility included
∗ Award 4MB Flash ROM
∗ PS/2 keyboard and PS/2 mouse connectors
∗ Floppy disk drive connector x1
∗ Parallel port x1, Serial port x2 (1x connector/ 1x header)
∗ USB 2.0 connector x4, headers x4 (connecting cable option)
∗ High Definition Audio connector (Line-in, MIC, 4x Line-Out)
Description
2