Install Memory - JETWAY 915GCPR2A User Manual

Note: The black pin and white prong will only "snap" on in one orientation
−
Check to ensure the black pin is rotated properly for installation with the slot perpendicular to the
heatsink

2-4 Install Memory

This motherboard provides
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 4.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1) DDRDDR266/DDR333/DDR400
Bank 2, 3 (DIMM2) DDRDDR266/DDR333/DDR400
Bank 4, 5 (DIMM3) DDRDDR266/DDR333/DDR400
Bank 6,7 (DIMM4) DDRDDR266/DDR333/DDR400
Total
For Dual channel Limited!
1. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM3 or DIMM2 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
2. DIMM1 & DIMM3, or DIMM2 & DIMM4 must be the same type, same size, same frequency
for dual channel function.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR266/DDR333/DDR400 DDR SDRAM module looks
like.
Click
four 184-pin DUAL INLINE MEMORY MODULES (DIMM)
184-Pin DIMM
DDR SDRAM Module
DDR SDRAM Module
DDR SDRAM Module
DDR SDRAM Module
System Memory (Max. 4.0GB)
PCS
18
Total Memory
X1
64MB∼1.0GB
X1
64MB∼1.0GB
X1
64MB∼1.0GB
X1
64MB∼1.0GB
4
64MB∼4.0GB