Table of Contents
Advertisement
•
Two hard disks can be connected to each connector. The first HDD is referred to as
the "Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-
ROM drive on the same IDE channel as a hard disk. Otherwise, the system performance
on this channel may drop.
2-6-2 Headers
(1)
Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2)
USB Port Headers (9-pin) : USB2, USB3
These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
(3)
IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
IDE4
(Secondary IDE)
Pin 1
Pin 1
Extra IDE RAID Connector
AUDIO
L-OUT-R
GND
MICP
GND
L-IN-R
Pin 1
Line-In/Out, MIC Headers
USB2
Pin 1
USB Port Headers
16
IDE3
(Primary IDE)
L-OUT-L
MIC
GND
L-IN-L
USB3
Pin 1
Advertisement
Table of Contents
