Frequency/Voltage Control; Load Standard/Optimized Defaults - JETWAY 613DFR1A User Manual

3-11 Frequency/Voltage Control

This section is for setting CPU Frequency Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Cyrix III Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/SDRAM Clock
CPU Clock Ratio
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
CPU/SDRAM Clock
This item allows you to select the CPU/SDRAM Clock, refer to Page 13, 14, 15.
CPU Clock Ratio
This item allows you to select the CPU ratio.

3-12 Load Standard/Optimized Defaults

Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance system
operations.
Frequency/Voltage Control
Default
Enabled
Disabled
Default
X 3
F6:Optimized Defaults F7:Standard Defaults
40
Item Help
Menu Level >
F1:General Help