Pc Health Status; Frequency/Voltage Control - JETWAY 994ANR4A User Manual

assigning the interrupt resource automatically you can select "manual", it will allow you to
choose specific resources by going into each of the sub menu that follows this field (a sub
menu is preceded by a " ").
The choice: Auto(ESCD), Manual .
IRQ Resources: When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to: This item allows you to determine the IRQ assigned to the
ISA bus and is not available to any PCI slot. Legacy ISA for devices compliant with the original PC
AT bus specification, PCI/ISA PnP for devices compliant with the Plug and Play standard whether
designed for PCI or ISA bus architecture.
The Choice: Legacy ISA and PCI/ISA PnP.
DMA Resources: When resources are controlled manually, assign each system DMA channel a
type, depending on the type of device using the DM channel.
DMA 0/1/3/5/6/7 assigned to: Legacy ISA for devices compliant with the original PC AT bus
specification, PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed
for PCI or ISA bus architecture.
Choices are Legacy ISA and PCI/ISA PnP.
PCI/VGA Palette Snoop: Leave this field at Disabled.
Choices are Enabled, Disabled.

3-7 PC HEALTH STATUS

CMOS Setup Utility – Copyright © 1984-1999 Award Software
CPU Warning Temperature
Current System Temp.
Current CPU Temperature
Current CPUFAN Speed
Current SYSFAN Speed
Vcore
+3.3V
+ 5 V
+12V
-12V
Shutdown Temperature
↑↓←→ Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit
F5:Previous Values
CPU Warning Temperature: this item is to setting the Max. Temperature of CPU before it will
have warning alarm.
Shutdown Temperature: this item is to setting the temperature for system shutdown , the
choice: from 60 ¡ C C to 90 ¡ C C

3-8 FREQUENCY/VOLTAGE CONTROL

CMOS Setup Utility – Copyright © 1984-1999 Award Software
PC Health Status
Disabled
25ºC
50ºC
4200
4200
2.0
3.3
5.1
12.1
-11.98
Disabled
F6:Fail-Safe Defaults
Figure 3-7
Frequency/Voltage Control
25
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults