Hawking HDWABN1 Manual page 47

Channel Number
MAC address 1-4
Set Security
After you finish with setting, please click 'Apply', and the following
message will be displayed:
When you see this message, the settings you made are successfully saved.
You can click 'Go Back' button to back to previous page and continue on
other setting items, or click 'Apply' button to restart the wireless access
point and the changes will take effect after about 30 seconds.
will be able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this Hi-Gain Outdoor
Wireless-N Access Point, select 2.4GHz (B+G+N).
Please select a channel number you wish to use.
The channel number must be same with another
wireless Hi-Gain Outdoor Wireless-N Access Point
you wish to connect
Please input the MAC address of the wireless
Hi-Gain Outdoor Wireless-N Access Point you
wish to connect
Click this button to select an encryption mode for
this wireless link, a new popup window will
appear. Please refer to Section 2-7 for detailed
descriptions.
40