Hawking HDWABN1 Manual page 44

Band
Channel Number
MAC address 1
Set Security
After you finish with setting, please click 'Apply', and the following
message will be displayed:
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this Hi-Gain Outdoor
Wireless-N Access Point, select 2.4GHz (B+G+N).
Please select a channel number you wish to use.
The channel number must be same with another
wireless Hi-Gain Outdoor Wireless-N Access Point
you wish to connect
Please input the MAC address of the wireless
Hi-Gain Outdoor Wireless-N Access Point you
wish to connect
Click this button to select an encryption mode for
this wireless link, a new popup window will
appear. Please refer to Section 2-7 for detailed
descriptions.
37