Asko T711 Use And Care Manual page 8

ST STA A A A A CKED INST ST CKED INST CKED INST CKED INSTALLA
ST ST CKED INST
ASKO dryers can be mounted on top of any matching
ASKO washer. Mounts are supplied with the machine.
The metal brackets are attached to the lower back of
the unit. The plastic cups are packed inside the dryer.
Two metal brackets for
securing the dryer to the
washer
To install the dryer on top of the washer, follow the steps
below:
1. Remove the two outside screws (A) (20 torx) from
the back of the washer and use them to secure the
metal brackets (B), as illustrated below.
A
2. To ensure the dryer is correctly positioned on top of
the washer, you will need to align the plastic cups
with the front top edge of the washer. To position the
plastic cups, break off the left tab on the cup to be
placed on the right side of the washer and break off
the right tab on the cup to be placed on the left side
of the washer.
3. Remove the protective paper from the self-adhesive
surface beneath the cups. Being careful not to press
the adhesive surface against the top of the washing
machine, use the tabs to position the cups (as
illustrated below) then press them firmly into place.
Washer front
4. Once the cups are correctly in place, break off the
remaining plastic tabs.
Page 8
ALLATION ALLA ALLA TION TION TION
ALLA TION
Two plastic cups to
secure the dryer legs.
B
Plastic cups
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards
until it engages with
the brackets on the
back of the washer.
6. Carefully lower
the front of the
dryer, making
sure the feet fit
into the plastic
cups.
Stack k k k k ed Installa Stac Stac Stac Stac ed Installation ed Installa ed Installa ed Installa
Tumble dryer
Washer
WARNING!
Never stack a washer on top of a dryer!
tion tion tion tion
Total height 67".
Adjustable to 69".