Setting The Speakers; Set Mx Mode Of The External Audio Processor - Alpine 9861 - DVA - DVD Player Owner's Manual

Setting the Speakers

1
Check that Defeat mode is off (page 21).
2
Press and hold MUTE for at least 2 seconds.
The audio processor control mode is activated.
3
Select the SP SELECT mode by pressing MUTE
repeatedly.
4
Press MODE to select the speaker.
5
Select any kind of speaker or set speaker to ON/OFF
by turning the Rotary encoder.
FRONT1: OFF/TW (Tweeter)/FULL (Full Range)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
6
Repeat steps 4 and 5 to set all the speakers.
7
When the setting is complete, press and hold MUTE
for at least 2 seconds.
The unit returns to the normal mode.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in "Speaker Setup" (page 40).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to "AUTO" when the PXA-H700 is connected.
1
Check that Defeat mode is off (page 21).
2
Press and hold MUTE for at least 2 seconds.
The MX mode of the audio processor control mode is
activated.
3
Select ON/OFF of MX by pressing
If ON is selected, press MODE.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
4
After setting to ON, select the desired MX level by
turning the Rotary encoder.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
36
-EN
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used to
reproduce the sound cleanly by making use of the data quantity.
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of compression.
This reproduces a well-balanced sound close to the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and produces
well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip. MX
uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
5
When the setting is complete, press and hold MUTE
for at least 2 seconds.
The unit returns to the normal mode.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• There is no MX mode for AM radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD.
or .