Edit Touch Panel Button-Mappings - AMX RMS CODECRAFTER Instruction Manual

RMS CodeCrafter AssetManager Project Pages
button fields are populated, RMS CodeCrafter will attempt to add the mapping without offering the
dialog.
In the event the mapping already exists, the mapping will fail and you receive a notification. To
re-map, the original must be removed from the device list.
Remove - Removes the device currently selected in the device list.
Previous - Regresses the RMS CodeCrafter wizard to the Device Parameters page.
Next - Progresses the RMS CodeCrafter wizard to the Generate NetLinx Code File page.

Edit Touch Panel Button-mappings

The Edit Touch Panel Button-mappings window allows you to edit the button-mappings.
Listed is the i!ConnectLinx function name and number. This field is static.
FIG. 46 Edit Touch Panel Button-mappings
Device - Drop down lists of devices available. This field is populated by devices extracted from the
integrated NetLinx file. You can select an existing device, enter a new device, or enter a D:P:S
address. If you select an existing device or enter a new device, a warning for the device is added to
the generated code file.
Panel Button Number - This is a text field you can edit to enter the panel button number.
OK - Accepts changes and closes window.
Cancel - Closes window and does not keep changes.
RMS CodeCrafter 59