Add/Edit Named Devices Window - AMX RMS CODECRAFTER Instruction Manual

RMS CodeCrafter AssetManager Project Pages
The named device grid lists all devices available for the project. Any entry not selected with a
check will be removed from the project upon closing the project.
Previous - Regresses the RMS CodeCrafter wizard to the Help Desk: Display Panels page.
Next - Progresses the RMS CodeCrafter wizard to the Monitored Third-Party Devices page.

Add/Edit Named Devices Window

FIG. 38 Add/Edit Named Devices Window
The Add/Edit Named Devices window is available to add and edit named devices. The fields you
can edit are as follows:
Device - Drop down lists of devices available. This field is populated by devices extracted from the
integrated NetLinx file. You can select an existing device, enter a new device, or enter a D:P:S
address. If you select an existing device or enter a new device, a warning for the device is added to
the generated code file.
Logical Name - A text field you can edit to name the device.
OK - Accepts changes and closes window.
Cancel - Closes window and does not keep changes.
RMS CodeCrafter 49