Table of Contents
Advertisement
When sending a TP4 file to a G4 panel, verify that the NetLinx Master Firmware is
build 85 or later. Verify the TPDesign4 program being used is Version 1.01 or higher.
Earlier versions of the firmware and TPD4 software are incompatible with G4 panels.
Alternatively, you can double-click in the Connection column to access the
Communication Settings dialog.
In Axcess, Master Source Code files are always mapped to the Master Controller
(device = 0). Master Source Code files cannot be mapped to any other device.
NetLinx Master Source Code files are mapped according to the System settings
when the Project was created. The only way to modify these settings is via the
System Properties dialog.
Also, when sending TPD files directly to a Touch Panel (i.e. via serial cable
connection), the device = 0.
Load Options
Both tabs share the following Load Options:
FileTransfer2
Communication Settings — Opens the Communication Settings dialog, where you can
edit the Platform, Transport Connection type and Communication Settings for the
selected file.
Device Mapping — Opens the Enter DPS dialog, where you can view/edit the D:P:S
assignment of the target device for the selected file.
Quick Load — Click to open the Quick Load dialog, where you can specify particular
file types to load into the Send list.
Load Workspace — Click to open the Open Workspace/AXW File dialog.
Load List — This option allow you to select and open an .FTL file (see below), via the
Open dialog. When an .FTL file is opened, the Send list is populated with the files
specified in the .FTL file for transfer.
Save List — This option saves the list of files currently displayed in the Send list as an
.FTL file (specify a name and target directory to save the .FTL file in the Save As dialog).
Remember Last Items Transferred — When selected, this checkbox will cause the list
of transferred files to be automatically reloaded the next time the File Transfer dialog is
opened. This is useful if you transfer the same files repeatedly. That way, you don't have
to re-add the items over and over again. De-selecting the checkbox clears the
remembered list of files and prevents file transfer from reloading the files the next time
the dialog is displayed.
Workspace display — This (read-only) field displays the currently open Workspace or
Workspace To-Go file.
Welcome To FileTransfer2
5
Advertisement
Table of Contents
