Stay Alert; Integrated Real Voice Option - Whistler 3400 Owner's Manual

OPERATION
Stay Alert™ Feature
The Stay Alert™ Feature is designed to test a driver's
alertness. To engage (when unit is not alarming):
• Press and hold City for 2 seconds. Display reads:
Within 30-60 seconds two beeps are sounded; to show
alertness, the driver must press either the Dark, City or Quiet
button within 3-5 seconds. If the button is pressed within 3-5
seconds, the cycle is repeated.
If a button was not pressed within 3-5 seconds alarm sounds
and the display reads:
• Press P/V to exit.
WARNING!!! Stay Alert™ is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
drowsy. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay
Alert™ feature may result in vehicle damage, personal injury
or death. NEVER OPERATE A VEHICLE IF YOU ARE
DROWSY.
®
Integrated Real Voice
When selected and Optional Voice Module is connected,
®
Real Voice will be used to articulate the following:
1. Band Identification
2. Safety Warning System™ messages
NOTE: In certain cases the voice message does not
replicate the text message.
11
3. Feature Selection