Reset Features; Care And Maintenance - Whistler 3400 Owner's Manual

RESET FEATURES/CARE & MAINTENANCE

Reset Features

All user features can be reset to factory settings.
• Remove Power from unit.
• Press and hold P/V and Quiet.
• Apply power to the unit.
• Wait for 2 beeps.
• Release P/V and Quiet. Unit is now reset.
1. Audio to level (4).
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Voice OFF.
7. Night Mode OFF.
8. Truck Mode OFF.
9. Safety ON.
10. Full Power Up sequence.
11. Default TONE 3.
12. BATT OFF.
13. TEMP OFF.
14. Rear antenna OFF.
15. Unit ON or OFF.

Care And Maintenance

Do not spray water, cleaners or polishes directly onto the
unit. The spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive cleaners on
the unit's exterior.
18