Stay Alert Feature; Safety Warning System - Whistler Total Band Protection XTR-690SE Owner's Manual

OPERATION
Stay Alert Feature
The Stay Alert Feature is designed to test a driver's
alertness. To engage (when the unit is not alarming) :
• Press and hold the City button for
approximately 2 seconds. Release the button
during or immediately after the alert is given.
Display shows: (PU HI I:::PT)
Within 30-60 seconds, two beeps are sounded;
to show alertness, the driver must press either the
City, Menu, or Quiet buttons within 3-5 seconds. If a
button is pressed within 3-5 seconds, the cycle is
repeated.
If a button is not pressed within 3-5 seconds, an
alarm sounds and the display shows: (GET
F.~E5
i)
• Press the Dark button to exit the Stay Alert feature.
WARNING!!!
Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT
operate a vehicle if you are drowsy. During
extended periods of vehicle operation, you should
take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage,
personal injury or death.
NEVER OPERATE A
VEHICLE IF YOU ARE DROWSY.
SWS™
Safety Warning System™
In communities where transmitters are located,
the Safety Warning System™ displays over 60
text messages. When Safety Radar is detected
the audio alert is geiger counter-like.
Safety Warning System Text Message
Example: Poor - Road - Surface.
Note:
.Not all areas have Safety Warning System!M
transmitters.
14