Whistler 3400 Owner's Manual page 10

OPERATION
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20
seconds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press Quiet (before a signal is detected) to engage Auto
Quiet. Display reads:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Note: When Auto Quiet engages, it cancels the audio to
the optional Voice Module.
Quiet Mode
Quiet Mode cancels the audio during an alert and any new
alert within 20 seconds. After 20 seconds, approximately 2
beeps are provided on any new alert and unit then remains
quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
7