NETGEAR FSM7328SNA Administration Manual page 480

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 28-51
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/10 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-52
b. Under IP Interface Configuration, scroll down to interface 1/0/10 and select the checkbox for 1/0/
10. 1/0/10 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration.
• In the IP address, enter 192.168.3.2.
• In the Subnet Mask, enter 255.255.255.0.
• Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
3. Configure 1/0/11 as a routing port and assign IP address to it.
28-39
v1.0, October 2009
PIM