NETGEAR FSM7328SNA Administration Manual page 149

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Routing > IPv6 > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-53
b. Under IPv6 Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for that
interface. Now 1/0/1 appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration:
• Select Enable in the IPv6 Mode field.
• Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
4. Assign IP address 2001::1 to the port 1/0/1.
a. From the main menu, select Routing > IPv6 > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-54
b. Under IPv6 Prefix Configuration, select 1/0/1 in the Interface field.
OSPF
v1.0, October 2009
8-44