NETGEAR FSM7328SNA Administration Manual page 447

NETGEAR Managed Switches Software Administration Manual, Release 8.0
(C) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
----------- ---------
192.168.1.1 225.1.1.1
(D) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
---------- ---------
192.168.1.1 225.1.1.1
Web Interface: Configuring PIM-DM
To use the Web interface to config PIM-DM, proceed as follows:
On Switch A:
1. Enable IP routing on the switch.
a. From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
Figure 28-2
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/1 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
PIM
Incoming
Protocol Interface
-------- ---------
PIMDM 1/0/21
Incoming
Protocol Interface
-------- ----------
PIMDM 7/0/21
v1.0, October 2009
Outgoing
Interface List
---------------
Outgoing
Interface List
---------------
7/0/24
28-6