Pair A New Or Second Device; Re-Pairing The Jabra Link 360 Adapter - Jabra SUPREME UC User Manual

PAIR A NEW OR SECOND DEVICE

1 . Ensure that the Jabra SUPREME UC is turned on .
2 . Tap the Voice Control button on the Jabra SUPREME UC until
you are prompted to "Say a command" .
3 . Say "Pair new device" and follow the pairing instructions .
NOTE: If you have disabled Voice Guidance and Control you can
put Jabra SUPREME UC in pairing mode manually by holding the
Answer/end button while flipping the boom arm to On position .
The Status Display will flash blue to indicate that you are in pairing
mode .

RE-PAIRING THE JABRA LINK 360 ADAPTER

1 . Remove the Jabra LINK 360 adapter from the PC, and turn off
the Jabra Supreme UC and other headsets .
2 . Put the Jabra Supreme UC in pairing mode by press and
holding the Answer/end button and opening the flip boom
arm . Release the button when you hear "Welcome, you are now
ready for pairing" .
3 . Put the Jabra LINK 360 adapter into the PC to begin pairing
automatically . It can take up to 1 minute to pair . The Jabra
LINK 360 status LED will flash blue . When the status LED turns
steady blue, the pairing is complete .
TIP: For extra functionality download and install Jabra PC Suite
from www .jabra .com/setup, and run Jabra Control Center .
JABRA SUPREME
5