Jabra SUPREME UC User Manual page 14

I hear crackling noises
- Check that the headset and the phone/device are within
10 meters (33 feet) of each other, and that there are no
obstructions between the two .
I cannot hear anything in my headset
- Increase the volume in the headset .
- Ensure that the headset is paired to a device .
- Ensure your phone is connected to the headset by tapping the
Answer/End button .
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone/device . Follow the pairing instructions to pair it
again .
I want to reset the pairing list in my headset
- The headset registers a list of up to 7 mobile phones . To clear
the pairing list and reset the Jabra SUPREME UC to factory
settings, turn on the Jabra SUPREME UC while simultaneously
holding the Volume Up (+) and Answer/end button for
6 seconds . The next time the headset is turned on it will
automatically enter pairing mode .
Will the Jabra SUPREME UC work with other Bluetooth
devices?
- The Jabra SUPREME UC is designed to work with Bluetooth
mobile phones/devices supporting a headset, hands-free
and/or advance audio distribution profile, and compliant with
Bluetooth version 1 .1 or higher .
I cannot use Reject call, call on hold, Redial or voice dialing
- These features are dependent on the ability of your phone/
device to support a hands-free profile . Even if the handsfree
profile is implemented reject call, call hold and voice dialing
are optional features which are not supported by all phone/
devices . Please consult your phone/device manual for details .
Please note some features can only be operated from the primary
device e .g . voice dial using Jabra SUPREME UC with 2 mobile
phones .
My headset does not announce the caller names during
JABRA SUPREME
13