Table of Contents
Advertisement
Gear Box Assembly
Level 1.
Tools required:
Grease Gun, Clean rag
Parts required:
ECHO
®
Grease.
1. Clean dirt from the grease fitting (A).
2. Carefully pump grease into fitting (A). DO NOT force grease. Too
much pressure will force grease past seals and cause damage.
Apply 1-2 pumps of grease every 15-25 hours of operation.
3. Wipe excess grease from around grease fitting.
SHARPENING BLADES
Level 3.
Tools required:
(2) 10 mm Sockets & Extensions , Flat file, Screw-
driver
Parts required:
None
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
LUBE
TM
14 oz. (P/N 91015) or Lithium Based
DANGER
H
C
EDGE
O
'
M
PERATOR
S
A
LIPPER
23
ANUAL
Advertisement
Table of Contents
