Sharpening Blades - Echo 02006800 Operator's Manual

SHARPENING BLADES

Level 3.
Tools required: Flat file, Screwdriver
Parts required: None
WARNING
Hedge Clipper Blades are very sharp. Wear gloves to protect
hands.
1. Disconnect spark plug wire from spark plug.
2. Remove blade stiffener (See "Blade Stiffener Remove/Install" on
page 26).
3. File each edge carefully. Follow the original shape of the blade.
IMPORTANT
If a power grinder is used DO NOT allow blade to over heat.
4. Assemble blade stiffener using new blade nuts if required. Tighten
bolts and nuts then loosen bolt 1/2 turn to allow free blade move-
ment.
5. Lubricate blades. See "Blade Lubrication Instructions," on page 23.
IMPORTANT
Blades should only be removed and reinstalled by an Authorized
ECHO Servicing Dealer, otherwise premature wear or internal
damage may occur.
DANGER
H C
EDGE
O ' M
PERATOR S
LIPPER
25
ANUAL