Table of Contents
Advertisement
(continued from previous page)
PCI/VGA Palette Snoop
Assign IRQ for VGA
Assign IRQ for USB
3.8 PC Health Status
This section describes the hardware monitoring of certain onboard devices. No options are user-defined.
Current CPU1 Temp.
Current CPU2 Temp.
Current CPUFAN1 Speed
Current CPUFAN2 Speed
CPU1 Vcore
CPU2 Vcore
3.3V
5V
12V
3.9 Set Supervisor Password / Set User Password
Both of these functions allow for passwords to be set accordingly for BIOS configuration.
When selecting one of the password functions, the following words will appear:
After typing in a new password of up to eight characters, press [Enter]. The following words will then
appear:
Type your new password again, and the password will then be set. Please note that entering a new pass-
word and then confirming it, will clear any old password that you had (depending on type of password).
36
Reserved. [Default setting is Disabled]
Sets whether an IRQ should be reserved for VGA. [Default set-
ting is Enabled]
Sets whether an IRQ should be reserved for USB. [Default set-
ting is Enabled]
Displays temperature of CPU1 in Celsisus and Farenheit.
Displays temperature of CPU2 in Celsisus and Farenheit.
Displays speed of CPUFAN1 in revolutions per minute (RPM).
Displays speed of CPUFAN2 in revolutions per minute (RPM).
Displays core voltage of CPU1.
Displays core voltage of CPU2.
Displays power supply voltage on 3.3V line.
Displays power supply voltage on 5V line.
Displays power supply voltage on 12V line.
ENTER PASSWORD:
CONFIRM PASSWORD:
http://www.tyan.com
Advertisement
Table of Contents
