Setup Keys
The table below shows how to navigate in the setup program using the keyboard.
+/-/PGUP/PGDN
Getting Help
Press [F1] to display a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press [ESC] or the [F1] key again.
In Case of Problems
If you discover that you have trouble booting the computer after making and saving changes with the
BIOS setup program, you can restart the computer by either:
Pressing [CTRL]+[ALT]+[DEL] (all three keys at the same time), or
Holding the power button down until the computer shuts off, then reset the CMOS (see p. 15)
Trinity 450 S2507S
Key
Arrow keys
Moves from one selection to the next
Enter
ESC
F1
F2
F5
F6
F7
F9
F10
Function
Select the highlighted option
Change option setting
Exit
General Help
Item Help
Previous values
Load failsafe defaults
Load optimized defaults
Menu in BIOS
Save settings and exit
27