Chipset Features Setup - TYAN TITAN VX AT User Manual

w w Security Option
This category allows you to limit access to the system setup, or just
setup. Default value is Setup
System The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt
Setup The system will boot, but access to setup will be denied if the
password is not entered at the prompt
w w Video BIOS Shadow
It determines whether Video BIOS will be copied to RAM, however, it
is an optional chipset design. Default is Enabled.

4.7 Chipset Features Setup

This screen controls the settings for the board's chip set. The controls for
this screen are the same as the previous screen.
The Chipset Features Screen
Auto Configuration
DRAM Timing
DRAM RAS# Precharge Time :3
DRAM R/W Leadoff Timing
DRAM RAS to CAS Delay
DRAM Read Burst Timing
DRAM Write Burst Timing
Fast MA to RAS# Delay
Fast EDO Path Select
Refresh RAS# Assertion
ISA Bus Clk
SDRAM(CAS Lat/RAS to CAS :Disabled
System BIOS Cacheable
Video BIOS Cacheable
8 bit I/O Recovery Time
16 bit I/O Recovery Time
Memory Hole at 15M/16M
Peer Concurrency
S1470-001-01 http://www.tyan.com
ROM ISA BIOS
CHIPSET SETUP UTILITY
AWARD SOFTWARE, INC.
:Enabled
:70ns
More Information on these settings
can be found at Tyan's web site.
http://www.tyan.com
:6
:3
:x2222/x3333
:x2222
:Disabled
:Disabled
:5/Clks
ESC :Quit
:Clk/4
F1 :Help
:Enabled
F5 :Old Values (Shift)F2 :Color
:Enabled
:1 F6 :Load BIOS Defaults
:1
F7 :Load Setup Defaults
:Disabled
:Enable
30
:Select Item
PU/PD/+/- :Modify