Power Management Setup - TYAN TITAN VX AT User Manual

4.7.1 Power Management Setup

POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC
Power Management
PM Control By APM
Video Off Method
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
IRQ3 (Wake-Up Event)
IRQ4 (Wake-Up Event)
IRQ8 (Wake-Up Event)
IRQ12 (Wake-Up Event) :Off
Power Down Activities
Com Ports Accessed
LPT Ports Accessed
Drive Ports Accessed
w w Power Management
Options are disabled, user defined, Min saving, and Max saving.
w w PM Control by APM
Options are "Yes" and "No". When set for "No", system BIOS will
ignore APM when power managing the system. If set on "Yes" the
system BIOS will wait for APM's prompt before it enters any PM
mode, e.g. Doze, Standby or Suspend.
w w Video Off Method
The "Blank Screen" option will let the system BIOS blanks the screen
when disabling video. V/H SYNC+Blank will let the BIOS turn off the
V-SYNC and H-SYNC signals from the VGA card to the monitor.
S1470-001-01 http://www.tyan.com
ROM ISA BIOS
:Disabled IRQ3 (Com2)
:No IRQ4 (Com1)
:Blank Screen IRQ5 (LPT2)
IRQ6 (Floppy Disk)
:Disabled IRQ7 (LPT1)
:Disabled IRQ8 (RTC Timer)
:Disabled IRQ9 (IRQ2 Redir)
:Disabled IRQ10 (Reserved)
IRQ11 (Reserved)
:Off IRQ12 (PS/2 Mouse)
:Off IRQ13 (Coprocessor)
:Off IRQ14 (Hard Disk)
IRQ15 (Reserved)
:Off
:Off
:Off
31
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off
:Off