Securing Child & Booster Seat In Vehicle - Graco 8J00MTX - Nautilus 3- In 1 Toddler Car Seat Owner's Manual

14.0 Securing Child & Booster Seat in Vehicle
1. Place the booster on vehicle seat equipped with
a lap/shoulder belt only. Slide restraint back until the
restraint is in contact with the vehicle seat back.
2. Place child in car seat with child's back flat against
back of car seat.
3. Position lap/shoulder belt through shoulder belt
guide not underneath shoulder belt guide . Belt
should pass over vehicle belt guide . Fasten buckle
and pull up on the shoulder belt to tighten.
4. If belt lays across child's neck, head or face,
redirect belt over shoulder by adjusting the head
support setting, See page 47, Adjusting Head
Support.
5. Check that shoulder belt is properly positioned
over shoulder and snug against child. A snug
strap should not allow any slack. It lies in a
relatively straight line without sagging. It does
not press on the child's flesh or push the
child's body into an unnatural position.
46