Graco 8J00MTX - Nautilus 3- In 1 Toddler Car Seat Owner's Manual page 32

Child restraint/booster seat
Table of Contents

Advertisement

4. Tighten vehicle seat belt
Push down hard with your knee or free hand
in the middle of the child restraint
. Then pull
and tighten the shoulder portion of the
lap/shoulder belt.
5. While pulling the shoulder portion of the
lap/shoulder belt, lay the shoulder belt inside the
opened lock-off
and snap the lock-off over the
.
shoulder belt
Two lock-offs are provided to allow for the seat to
be installed on the right or left side of the vehicle
seat. Only use one lock-off at a time. NEVER
try to use both lock-offs when installing the child
restraint.
DO NOT try to close the lock-off over anything
but the shoulder portion of the vehicle
lap/shoulder belt. If any other part of the belt
is in the way then try another seat location.
For more information on how to tighten the
belt for your seat belt system, see Section 7.0
Choosing an Appropriate Vehicle Seat Location,
p.18, or your vehicle owner's manual.
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3-in-1 - nautilus matrix car seat in mileyNautilus

Table of Contents