Direct Access Tuning; Content Alert Setting; Editing A Content Alert Item; Delete A Content Alert Item - Kenwood KDC-BT952HD Instruction Manual

SiriusXM Vehicle Connect Tuner Control
(optional tuner and service required)
Function of remote control

Direct Access Tuning

You can search for a channel directly by entering its
number.
1
Select Satellite Radio source
2
Enter the Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter a channel number
Press the number buttons.
4
Tune in to the entered channel
Press the [4] or [¢] button.
Canceling the Direct access tuning mode
Press the [DIRECT] button on the remote
control.
⁄
• If you operate no button for 10 seconds, the Direct
Access Tuning mode is automatically canceled.
67
|
KDC-X996/ KDC-BT952HD
Content alert
When the broadcast of the song by the registered
artist or the broadcast of the registered song starts,
a message appears to allow you to switch the
current source to the desired channel, even though
the receiving source is other than SIriusXM Radio.
Registering contents
1
Receive the contents you wish to register
2
Select the Contents registration mode
Press the [ ] button for at least 1 second.
3
Register the contents
Turn the [VOL] knob to select a contents type
("Store Artist?" or "Store Song?"), and then
press the [VOL] knob.
"Artist Stored" or "Song Stored" is displayed.
⁄
• You can register a total of 50 types of contents including
both artists and songs.
When a Content alert occurs
1
A content alert message is displayed
When multiple content alerts occur, a content
name is displayed one after another. The previous
content name can be displayed and selected by
the operation in step 3.
A content alert message is displayed for five
seconds from the last content alert.
The following switching operation to your desired
content can be performed while the message is
being displayed.
2
Start selecting a content
Press the [VOL] knob.
3
Select your desired content of which content
alerts are occurring
Turn the [VOL] knob to select the contents, and
then press the [VOL] knob.
The current source switches to the channel that is
broadcasting the selected content.
Canceling the Content alert mode
Press the [MENU] button.

Content alert setting

You can turn on/off the content alert function.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Alert set mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings" > "Content Alert" > "Alert Set".
4
Turn on or off the Content alert function
Turn the [VOL] knob to select "ON" or "OFF",
and then press the [VOL] knob.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Editing a Content alert item

You can enable or disable the registered content
alert item individually.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Content alert item edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings" > "Content Alert" > "Alert
Item Edit".
4
Select a contents type
Turn the [VOL] knob to select "Song" or
"Artist", and then press the [VOL] knob.
5
Select or deselect the selected Content alert
item
Turn the [VOL] knob to select Content alert
item, and then press the [VOL] knob.
The selected Content alert item is selected and
deselected alternately each time you press the
[VOL] knob.
"*" is indicated for the selected item name.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Delete a Content alert item

You can delete the registered Content alert item.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Content alert item delete mode
Turn the [VOL] knob and press it when the
desired item is displayed.
> >
Select "Settings" "Content Alert"
"Alert Item Delete".
4
Select a contents type
Turn the [VOL] knob to select "Song Delete",
"Artist Delete" or "All Delete", and then press
the [VOL] knob.
Selecting "All Delete" allows you to delete all
Content alert items together. Proceed to step 6.
5
Select the Content alert item you wish to
delete
Turn the [VOL] knob to select Content alert
item, and then press the [VOL] knob.
6
Determine the selection
Turn the [VOL] knob to select "YES", and then
press the [VOL] knob.
"Completed" is displayed.
7
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
|
English
68