Operating voltage
Interface to host
SATA bus speed
SAS/SATA ports
Firmware
Compatible devices
Enclosure management
Performance Features
Drive data transfer rate
Maximum queue tags per
drive
Support for multiple initiators
Performance
Electrical Characteristics
All power is supplied to the Intel
standard PCI Express* x4 connector 12 V rails, or a remote RA 4-pin 12V power
connector.
The +12 V rail is used by the 3.3 V logic circuitry and also used to generate the other
required voltage rails of +1.0 V and +1.8 V. The max operation power is 14.6 W.
Thermal and Atmospheric Characteristics
The thermal and atmospheric characteristics are:
•
Relative humidity range: 20% to 80% non-condensing
22
Specification
Table 6. Performance Features
Specification
Upto 6 Gigabit/sec per lane
As many as the drive can accept
Yes
Native command queuing
®
Intel
RAID Expander Card RES2SV240
+12 V
PCI Express* x4 compliant connector only to provide power for
the expander card. No other PCI Express* signals are used
Upto 6 Gbps per port, point-to-point
6 x4 internal ports, for both initiator and target devices
8 MB in reflashable flash ROM
•
2.5-inch and 3.5-inch SAS 2.0 or SATA drives
•
Non disk devices including expanders
•
Can support drives of mixed capacity
•
SAS 2.0 host controllers (RAID or Non-RAID)
SGPIO
®
Intel
RAID Expander Card RES2SV240
®
RAID Expander Card RES2SV240 through the
Intel® RAID Expander Card RES2SV240 Hardware User's Guide