HighPoint ATA-133 RAID User Manual page 8

Raid controller
Table of Contents

Advertisement

Introduction
If you cannot find these two device items,or there is
indicates that the driver has not been correctly installed and needs reinstallation.
WINDOWS NT4.0
Install driver under existing Windows NT4.0
1.
Click
Start-->Settings-->Control
Adapter
icon;
2. In the follow-up window, select
3. In the follow-up window, select
4. Insert the driver diskette, and input the path of driver location A:\WinNT,
then click OK;(if users install driver from CD make sure input the
correct path, for example D:\HPT370\Driver\WinNT)
5. In the follow-up window, select
troller or HPT372 UDMA/ATA 133 RAID Controller
OK;
6. Follow the system prompts to finish driver installation. When finished,
restart the computer.
Install driver during the process of Windows NT4.0 installation
( For install HPT driver during Windows NT4.0/Windows2000/WindowsXP
installation, recommend users copy the driver to a floppy diskette's root
directory)
1. Press
F6
key when the system prompts
computer's hardware
2. The installation will continue. Later, installation program will prompt
user to press
S
3. In the follow-up Device Type window, select
ENTER to confirm;
4. The installation program will prompt user to insert the driver diskette.
Please insert it and then press ENTER to confirm;
Panel, then double-click
Driver
Have
Disk...;
HPT370 UDMA/ATA100 RAID Con-
configuration;
key to specify other devices, please press
?
or
!
on device icon, it
SCSI
item, then click
Add
button;
item, then click
Setup is inspecting your
S
key;
Other
item, then press
1-4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hpt370Hpt372

Table of Contents