Download Print this page
HighPoint SSD7749M Quick Installation Manual

HighPoint SSD7749M Quick Installation Manual

8x m.2 port to pcie 4.0x16 nvme raid controller
Hide thumbs Also See for SSD7749M:

Advertisement

Quick Links

SSD7749M
8x M.2 Port to PCIe 4.0x16 NVMe RAID Controller
Quick Installation Guide
1

Advertisement

loading

Summary of Contents for HighPoint SSD7749M

  • Page 1 SSD7749M 8x M.2 Port to PCIe 4.0x16 NVMe RAID Controller Quick Installation Guide...
  • Page 2: System Requirements

    • RHEL/Debian/Ubuntu/Fedora/Proxmox/ Rocky Linux • (Linux kernel 3.10 and later) Arch Linux (Kernel 5.17.5 and above) • macOS 10.13.6 ~ macOS 13.x • ARM Platform (NVIDIA model, Support Linux) • Kit Content SSD7749M Controller Card • Quick Installation Guide •...
  • Page 3 SSD7540M Hardware Front View Full-Length anodized aluminum heat sink Full Height form factor External power port Low-Noise Cooling Fan PCIe 4.0 x16 Host Interface...
  • Page 4 PORT2 SSD LED PORT1 SSD LED PORT4 SSD LED POTR3 SSD LED PORT6 SSD LED PORT5 SSD LED PORT8 SSD LED PORT7 SSD LED Disk LED: Green, flashing:Disk I/O. Solid Red:The disk has failed.
  • Page 5: Hardware Installation

    Hardware Installation Step 1. Apply pressure to release the lock, turn it counter-clockwise then take out the tray. Step 2. Loose the screw and remove the film Step 3. Gently insert the SSD into the Tray.
  • Page 6 Note: Make sure the SSD contacts (“golden fingers”) are clean priors to installation. Step 4. Refasten the screw to secure the SSD. Step 5. After installing all SSDs, carefully insert the Trays into the slots.
  • Page 7 Repeat Steps 1 to 5 to install the remaining SSDs. The following example shows eight Gen4 SSDs installed into Ports 1-8:...
  • Page 8 Step 7. Power up the SSD external power supply Note: If the external power supply is not powered on, the SSDs may drop offline or remain undetected, which could lead to data loss. SSD7749M relies on two power sources to support eight SSDs;...
  • Page 9 Please make sure to install the driver before physically installing the SSD7749M. Note: Install the driver in the system first and then install the board Resources A variety of manuals, guides and FAQ’s are available for the SSD7749M RAID controller.
  • Page 10: Customer Support

    FAQ & Troubleshooting: FAQ - HighPoint Technologies, Inc. (helpjuice.com) Customer Support If you encounter any problems while utilizing the SSD7749M, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department.
  • Page 11 © Copyright 2022 HighPoint Technologies, Inc. All rights reserved.