HighPoint ATA-133 RAID User Manual page 9

5. In the follow-up window, select
Controller, then press ENTER to confirm;
6. The follow-up window will list out the devices to be installed, in which
HPT370/372/372A ATA RAID Controller
users want to install other devices, please operate at this time. If all
devices have been successfully installed, please go to next step);
7. Press ENTER to continue the installation of Windows NT4.0.
Verify Installation
When the driver has been successfully installed and the computer restarted:
1. Click Start-->Setup-->Control
Adapter item;
2. If there is HPT370 UDMA/ATA100 RAID Controller or HPT372
UDMA/ATA 133 RAID Controller
indicates that the driver has been successfully installed. Otherwise,
users need to reinstall the driver.
Windows 2000
Install driver under existing Windows 2000
Automatic Installation
Start the computer and boot into Windows 2000, the system will automatically
detect new hardware and prompt users to install the driver. Please insert the
driver diskette and follow the system prompts to finish the driver installation
and then restart the computer.
1-5
HPT370/372/372A ATA RAID
item should be included( If
Panel, and then double-click
item in the popup window, it
Introduction
SCSI