HighPoint ATA-133 RAID User Manual page 28

RAID Administrator
Available Disks:
Selected Disks:
Creation Option:
2. When the disk array's configuration is finished, click the
warning message will popup, see below:
Pay attention to the warning message, and then click
of disk array, or click
3. Next, a message box will popup to prompt user that disk array has been created
successfully and whether to restart the computer, see below:
Please click Yes to restart the computer or click
(New setting will take effect only after restarting)
This pane will list out all the disks that currently can be
used to create disk array.
This pane will list out the disks that have been selected to
create the disk array. User can highlight the specific disk
in Available Disks pane and click the corresponding hand
icon to select that disk into the
This option is only available after user selects RAID 1
array in the Array Type
data on the source disk (first selected disk) when creating
RAID 1 array. Create Only
selected disks and create a clean RAID 1 array with no
data on it.
No to cancel;
Selected Disks pane.
box . Duplicate means reserve the
means destroy all data on the
Create button, then a
Yes to finish the creation
No to skip restarting;
3-4