HighPoint ATA-133 RAID User Manual page 18

BIOS Configuration Utility
Warning:
1. Please pay attention to the warning message at Step 6:
Creating RAID 0 array, JBOD array or RAID 0+1 array will destroy all
data on all the selected disks.
When creating mirror array,
source disk (the firs selected disk) and copy them onto the mirror disk (the
second selected disk) when creating mirror array; But
will destroy all data on all the selected disks and create a clean mirror array
without any data on it.
2.3 Delete Disk Array
Follow these steps to delete a disk array:
1. Within the Menu
Delete Array item, and then press ENTER, then the
activated, see below:
highlight the target disk array and then press ENTER to delete it;
(User can select a disk array by selecting its first member disk)
2. Then a warning message will appear as below:
Pay attention to the warning message, and then press Y to delete the
selected disk array, or press N to cancel.
Warning:
1. Deleting a disk array will destroy all the data on the disk array.
Duplication operation will reserve the data on
column of main interface, use the arrow key to highlight
Create Only operation
Status column will be
2-4