Fuel Unit; Air Cleaner; Fuel Tank - KYMCO AGILITY 125 Service Manual

5
. FUEL SYSTEM

FUEL UNIT

REMOVAL
Remove the related parts.
Disconnect the fuel unit wire connector.
Turn the fixed plate on the fuel unit,take the
fuel unit off.
Do not bend the float arm on the fuel
unit,otherwise the figure on the fuel
meter will not correct.
INSTALLATION
Inspet if the fuel unit is damaged,or harden.
Assemble the fuel unit in the reverse order
of disassembly.
Align the groove on the fuel unit with
the angle on the fuel tank.
Inspect if the fuel tank leaked after
installing and filling the gasoling.

AIR CLEANER

Loosen the air cleaner connecting tube band
screw.
Disconnect the clinhead cover breather tube
from the air cleaner.
Remove the two bolts and air cleaner case.

Fuel Tank

Fuel Unit
bolts
AGILITY 50
Fuel Unit Wire
Align Mark
air cleaner
5-14