Headlight; Bulb Replacement; Taillight/Stoplight/Rear Turn Signal Light/License Light - KYMCO AGILITY 125 Service Manual

17
. LIGHTS/INSTRUMENTS/SWITCHES

HEADLIGHT

REMOVAL
Remove the screw on the front of the front
cover.
Remove the six screws on the back of the
front cover.
Remove the front cover.
The installation sequence is the reverse of
removal.
Align the tab on the headlight with the
groove on the handlebar cover.
After installation, adjust the headlight
beam. ( 3-9)

BULB REPLACEMENT

Remove the headlight bulb
Remove the headlight replace with new
bulbs.
The installation sequence is the reverse of
removal.
TAILLIGHT/STOPLIGHT/REAR TURN
SIGNAL LIGHT/LICENSE LIGHT
Remove the two screws attaching the rear
protector molding.
Remove the rear protector molding and
remove the two nuts attaching the rear light
shell.
Remove the rear turn signal light bulb and
replace with a new one.
The installation sequence is the reverse of
removal.
17-5
. ( 2-2)
Coupler
Screw
Front Cover
Headlight Bulb Coupler
Nuts
FILLY LX 50
Screws