Frame Covers; Handlebar Front/Rear Cover Removal - KYMCO AGILITY 125 Service Manual

2
. FRAME COVERS/EXHAUST MUFFLER
AGILITY 50
Screw

FRAME COVERS

FRONT COVER REMOVAL
Remove the screw on the front of the front
cover.
Remove the six screws on the back of the
front cover.
Remove the front cover.
The installation sequence is the reverse of
removal.
Front Cover Screws
Handlebar Front Cover
Handlebar Rear Cover
HANDLEBAR FRONT/REAR COVER
REMOVAL
HANDLEBAR FRONT COVER REMOVAL
Remove the handlebar front cover screw.
Remove the two screws attaching the
handlebar front cover.
Disconnect the headlight wire connector and
remove the handlebar front cover.
Screws
Screw
HANDLEBAR REAR COVER REMOVAL
Handlebar Front Cover
Disconnect the speedometer cable, right and
left handlebar switch couplers, and the stop
switch wire connectors.
Remove the bolt attaching the handlebar rear
cover.
Remove two screws inside the handlebar rear
cover and remove the handlebar rear cover.
The installation sequence is the reverse of
removal.
Bolt
2-2