How To Transfer Designs To The Machine - Pfaff SMART 300E User Manual

User's Guide
When opening the
3D Embroidery Intro
for the fi rst time or
after rebooting, you
will get a message
stating that you
should turn on the
machine. Click on
the OK button and
the 3D Embroidery
Intro and the
Navigator will be
turned on.
26
Connectivity to your computer
To be able to load the embroideries to your machine you need to
install the software on your PC computer and connect the machine to
your computer with the cable. In the 3D Embroidery Intro software you
will be able to adjust your embroideries before you stitch them out.

How to transfer designs to the machine

1. Ensure the embroidery machine is connected to your computer
and turned on.
2. Click the Start button at the bottom left of your computer screen
and the Start menu appears.
3. Move the arrow pointer to All Programs and another menu will
appear.
4. Move the arrow pointer to 3D Embroidery Intro and a menu of
modules will appear.
5. Click on 3D Embroidery Intro to launch it. 3D Embroidery Intro
and 3D Navigator will start. The Navigator icon will appear in the
system tray.
6. Open a design by clicking on the View Designs icon
Viewer dialog box click on the browse folder icon with three dots.
7. Browse to the folder C:\3DEmbroideryIntro\Samples\3DEmb1\ and
choose the folder you want to open. Click on the design you want
to open.
. In the