Place Bobbin In Machine - Pfaff SMART 300E User Manual

Place Bobbin in Machine

A. Open cover to the bobbin
area by moving the small
lever to the right.
B. Insert the bobbin into the
bobbin case, with the thread
in the direction shown by the
indicator under the bobbin
cover.
C. Guide the thread around the
fi nger through the channel
towards the back. Cut the
thread by pulling it towards
you.
D. Replace the bobbin cover by
placing the left side in place
and pressing lightly on the
right, until it snaps into place.
GET READY TO EMBROIDER
Visually check the
level of the bobbin
thread periodically
as you remove
your completed
embroidery.
If your bobbin runs
out and the machine
doesn't stop, you
can easily navigate
to the point where
you need to begin
using the Navigator
software.
13