Stitching A Design - Pfaff SMART 300E User Manual

Stitching a Design

1. To run the program, the
machine should be turned
on with the USB cable
attached.
2. Click on the 3D Embroidery
Intro icon on your desktop.
3. The opening screen of
the 3D Embroidery Intro
software appears with
the Navigator screen
on top of it (Fig. St-1).
On the software screen,
go to File, Open and
select C:/3DEmbroidery
Intro/Samples/3D Emb1/
Holidays/Heart 1.
Open design Heart 1.
4. Click on the Send
from the top tool bar and
choose Send to Machine
Memory. In the Navigator
screen, click on the square
labeled No Design (Fig. St-
2).
St-1
icon
St-2
CONNECTIVITY TO
YOUR COMPUTER
The hoop will move
when the software
is launched and
the machine is
recognized.
39