Pfaff HOBBY 1142 Manual page 24

1:14 Operate your hobby 1142
Adjusting stretch stitch balance
If the stretch stitches are uneven when
you sew on a particular fabric, correct
them by turning the stitch length dial.
Balancing stitches:
If the stitches are drawn out, correct them
by turning the dial in the "–" direction.
If the stitches are compressed, correct
them by turning the dial in the "+"
direction.
Stitch width dial
A
The stitch width can be adjusted with the
stitch width dial (A). Set the desired stitch
width number at the setting mark (B).
The higher the number, the wider the
B
stitch.
5 4 3 2 1 0
Straight stitch is sewn with stitch width 0.
Note: Do not turn the stitch width dial while
the needle is in the fabric, otherwise the needle
may bend or break.