Biostar TPOWER X58 Setup Manual page 40

Motherboard Manual
Increase Speed
Decrease Speed
Click the auto-control off and then the adjust level will show; use the level to
increase/decrease the fan speed. Be aware if the fan level been down to 0%,
the fan will still not completely stop; this is for your system's protection.
<Fan Control Settings>
Click to enter the fan control
setting dialog. Here you can set CPU
temperature to control the fan; including
target CPU temperature, CPU
temperature for full fan speed, and CPU
temperature for shutdown system.
Besides, you can also see system
information in this dialog.
38
Auto-Control
OFF