Biostar B350GT3 Bios User Manual
  1. Manuals
  2. Brands
  3. Biostar Manuals
  4. Motherboard
  5. B350GT3
  6. Bios user manual

Biostar B350GT3 Bios User Manual

Hide thumbs Also See for B350GT3:
Table of Contents

Advertisement

Quick Links

See also: Manual
BIOS User Guide
B350GT3 & X370GT3
BIOS Update ������������������������������������������������������������������������������������� 2
UEFI BIOS Setup �������������������������������������������������������������������������������� 6
1� Main Menu ����������������������������������������������������������������������������������� 7
2� Advanced Menu ���������������������������������������������������������������������������� 8
3� Chipset Menu �������������������������������������������������������������������������������31
4� Boot Menu �����������������������������������������������������������������������������������34
5� Security Menu ������������������������������������������������������������������������������36
6� O�N�E Menu����������������������������������������������������������������������������������38
7� Exit Menu�������������������������������������������������������������������������������������41

Advertisement

Table of Contents
loading

Related Manuals for Biostar B350GT3

Summary of Contents for Biostar B350GT3

  • Page 1: Table Of Contents

    BIOS User Guide B350GT3 & X370GT3 BIOS Update ������������������������������������������������������������������������������������� 2 UEFI BIOS Setup �������������������������������������������������������������������������������� 6 1� Main Menu ����������������������������������������������������������������������������������� 7 2� Advanced Menu ���������������������������������������������������������������������������� 8 3� Chipset Menu �������������������������������������������������������������������������������31 4� Boot Menu �����������������������������������������������������������������������������������34 5� Security Menu ������������������������������������������������������������������������������36 6� O�N�E Menu����������������������������������������������������������������������������������38...

  • Page 2: Bios Update

    The BIOS can be updated using either of the following utilities: •  BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.
  • Page 3 B350GT3 & X370GT3 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the <Y> key to restart system. 8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
  • Page 4 Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
  • Page 5 B350GT3 & X370GT3 6. After the BIOS Update process is finished, click on “OK” to reboot the system. 7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup. After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>...

  • Page 6: Uefi Bios Setup

    UEFI BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM. UEFI BIOS determines what a computer can do without accessing programs from a disk.

  • Page 7: 1� Main Menu

    B350GT3 & X370GT3 1� Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information It shows system information including UEFI BIOS version, Project Code, Model Name, Build Date and etc.

  • Page 8: 2� Advanced Menu

    2� Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Note   » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. AMD CBS 8 | 2.
  • Page 9 B350GT3 & X370GT3 Zen Common Options RedirectForReturnDis This item from a workaround for GCC/C000005 issue for XV Core on CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14 [DecfgNoRdrctForReturns] to 1. Options: Auto (Default) / 1 / 0 L2 TLB Associativity This item 0 - L2 TLB ways [11:8] are fully associative.
  • Page 10 Custom Core Pstates Accept Custom Pstate0/1/2/3/4/5/6/7 This item allows you to set the Custom Pstate 0~7. Options: Auto (Default) / Custom / Disabled Pstate0~7 FID Specifies the core frequency multiplier. COF = 200MHz. Pstate0~7 DID Specifies the core frequency divisor (DID [0] should zero if DID [5:0] > 1Ah. Pstate0~7 VID Specifies the core voltage.
  • Page 11 B350GT3 & X370GT3 DF Common Options DRAM scrub time This item provide a value that is the number of hours to scrub memory. Options: Auto (Default) / Disabled / 1 hour / 4 hour / 8 hour / 16 hour / 24 hour / 48 hour Redirect scrubber control This item control DF::RedirScrubCtrl [EnRedirScrub].
  • Page 12 System probe filter This item controls whether or not the probe filter is enabled. Has no effect on parts where the probe filter is fuse disabled. Options: Auto (Default) / Disabled / Enabled Memory interleaving This item controls fabric level memory interleaving (AUTO, none, channel, die, socket). Options: Auto (Default) / None / Channel / Die / Socket  ...
  • Page 13 B350GT3 & X370GT3 DDR4 Common Options DRAM Timing Configuration 2. Advanced Menu | 13...
  • Page 14 Accept Overclock This item Memory Overclock Settings. Options: Auto (Default) / Enabled Memory Clock Speed This item allows you to set the memory clock frequency. Options: Auto (Default) / 667MHz / 800MHz / 933MHz / 1067MHz / 1200MHz / 1333MHz / 1467MHz / 1600MHz / 333MHz / 400MHz / 533MHz / 1050MHz / 1066MHz This item sets the tCL time.
  • Page 15 B350GT3 & X370GT3 Tras This item specify the min RAS# active time. Options: Auto (Default) / 15h Clk / 16h Clk / 17h Clk / 18h Clk / 19h Clk / 1Ah Clk / 1Bh Clk / 1Ch Clk / 1Dh Clk / 1Eh Clk / 1Fh Clk / 20h Clk / 21h Clk / 22h Clk / 23h Clk / 24h Clk / 25h Clk / 26h...
  • Page 16 Security TSME This item transparent SME: AddrTweakEn = 1 ; ForceEncrEn = 1 ; DataEncrEn = 0. Options: Auto (Default) / Disabled / Enabled DRAM Memory Mapping Chipselect Interleaving This item Interleave memory blocks across the DRAM chip selects for node 0. Options: Auto (Default) / Disabled BankGroupSwap This item allows you to set BankGroupSwap function.
  • Page 17 B350GT3 & X370GT3 Address Hash Bank This item enabled or disabled bank address hashing. Options: Auto (Default) / Enabled / Disabled Address Hash CS This item enabled or disabled CS address hashing. Options: Auto (Default) / Enabled / Disabled FCH Common Options...

  • Page 18: Trusted Computing

    Trusted Computing Device Select This item TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices if not found, TPM 1.2 devices will be enumerated.
  • Page 19 B350GT3 & X370GT3 ACPI Sleep State This item select ACPI sleep state the system will enter when the SUSPEND button is pressed. Options: S3 (Suspend to RAM) (Default) / Suspend Disabled Restore AC Power Loss The item specify what state to go to when power is re-applied after a power failure.
  • Page 20 SATA Configuration OnChip SATA function This item enables or disables OnChip SATA function. Options: Enabled (Default) / Disabled OnChip SATA Type This item select OnChip SATA Type. Options: AHCI (Default) / RAID Promontory Common Options 20 | 2. Advanced Menu...
  • Page 21 B350GT3 & X370GT3 PT USB Configuration Options PT XHCI GEN1/2 Options: Auto (Default) / Disabled / Enabled SMART FAN Control CPU Smart FAN1 & System Smart FAN1/2 This item allows you to control the CPU/System Smart Fan function. Options: Disabled (Default) / 4Pin Note  ...
  • Page 22 Control Mode This item provides several operation modes of the fan. Options: Manual / Quiet / Aggressive Fan Ctrl OFF(°C) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM. Options: 10 (°C) (default) Fan Ctrl ON(°C) When CPU temperature is higher than this value, the CPU fan controller will turn on.
  • Page 23 B350GT3 & X370GT3 Serial Port 1 Configuration Serial Port This item enabled or Disabled Serial Port (COM). Options: Enabled (Default) / Disabled Change Settings This item select an optimal settings for Super IO Device. Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 / IO=2F8h;...

  • Page 24: Cpu Configuration

    Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. Options: Disabled (Default) / 70°C/158°F / 75°C/167°F / 80°C/176°F / 85°C/185°F / 90°C/194°F CPU Configuration This item shows CPU Information. PowerNow This item enables or disables the generation of ACPI _PPC, _PSS, and _PCT objects. Options: Enabled (Default) / Disabled NX Mode This item enables or disables No-execute page protection Function.

  • Page 25: Pci Subsystem Settings

    B350GT3 & X370GT3 PCI Subsystem Settings PCI Latency Timer This item value to be programmed into PCI Latency Timer Register. Options: 32 PCI Bus Clocks (Default) / 64 PCI Bus Clocks / 96 PCI Bus Clocks / 128 PCI Bus Clocks /...
  • Page 26 PCI Express Settings No Snoop This item enables or disables PCI Express Device No Snoop option. Options: Enabled (Default) / Disabled Maximum Payload This item set Maximum Payload of PCI Express Device or allow System BIOS to select the value. Options: Auto (Default) / 128 Bytes / 256 Bytes / 512 Bytes / 1024 Bytes / 2048 Bytes / 4096 Bytes Maximum Read Request...

  • Page 27: Network Stack Configuration

    B350GT3 & X370GT3 Network Stack Configuration Network Stack This item enables or disables UEFI network stack Options: Disabled (Default) / Enabled Note   » The following items appear only when you set the Network Stack function to [Enabled] IPv4 PXE Support This item enables or disables IPv4 PXE Boot Support.

  • Page 28: Csm Configuration

    CSM Configuration CSM Support This option enables or disables CSM support. Options: Enabled (Default) / Disabled GateA20 Active Upon Request – GA20 can be disabled using BIOS services. Always – do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Options: Upon Request (Default) / Always Option ROM Messages This item set display mode for Option ROM.
  • Page 29 B350GT3 & X370GT3 Other PCI device ROM priority This item for PCI devices other than Network, Mass storage or Video defines which OpROM to launch. Options: UEFI (Default) / Legacy / Do not launch NVMe Configuration The item shows NVMe controller and driver information.

  • Page 30: Usb Configuration

    USB Configuration Legacy USB Support The item allows you to enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Options: Enabled (Default) / Disabled / Auto Legacy USB3.0 Support The item enables or disables legacy USB3.0 support.

  • Page 31: 3� Chipset Menu

    B350GT3 & X370GT3 3� Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components.

  • Page 32: North Bridge

    North Bridge IOMMU This item enables or disables IOMMU support. Options: Disabled (Default) / Enabled GFX Configuration PSPP Policy This item allows you to set PCIe speed power policy. Options: Balanced-High (Default) / Disabled / Performance / Balanced-Low / Power Saving / Auto 32 | 3.

  • Page 33: Onboard Device

    B350GT3 & X370GT3 Onboard Device Realtek PCIE NIC This item enables or disables Realtek PCIE NIC. Options: Enabled (Default) / Disabled Onboard LAN Option ROM This item enables or disables Onboard LAN Option ROM. Options: Disabled (Default) / Enabled 3. Chipset Menu | 33...

  • Page 34: 4� Boot Menu

    4� Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. Options: 2 (Default) Bootup NumLock State This item selects the keyboard NumLock state. Options: On (Default) / Off Full Screen Logo Display This item allows you to enable/disable Full Screen Logo Show function.
  • Page 35 B350GT3 & X370GT3 SATA Support Options: Last Boot HDD Only (Default) / All Sata Devices VGA Support If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post. EFI driver will still installed with EFI OS.

  • Page 36: 5� Security Menu

    5� Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. Secure Boot Menu 36 | 5. Security Menu...
  • Page 37 B350GT3 & X370GT3 Attempt Secure Boot Secure Boot activated when Platform Key(PK) is enrolled, System mode is User/Deployed, and CSM function is disabled. Options: Disabled (Default) / Enabled Key Management Install Factory Default keys Force System to User Mode - install all Factory Default Keys. Change takes effect after reboot.

  • Page 38: 6� O�N�E Menu

    6� O�N�E Menu This submenu allows you to change voltage and clock of various devices. Note   » We suggest you use the default setting. Changing the voltage and clock improperly may damage the device.   » The options and default settings might be different by RAM or CPU models.  ...
  • Page 39 B350GT3 & X370GT3 DIMM Profile These items display memory information. Vivid LED Control On/Off This item Vivid LED Control Switch. Options: Enabled (Default) / Disabled Color Wheel This item Vivid LED Color Wheel. Options: Disabled (Default) / Enabled 6. O.N.E Menu | 39...
  • Page 40 Sparkle Mode This item Vivid LED Sparkle Mode. Options: Permanent (Default) / Shine / Breathe This item allows you to adjust the value for RED color model. Range: 0-255. Options: 0 (Default) GREEN This item allows you to adjust the value for GREEN color model. Range: 0-255. Options: 0 (Default) BLUE This item allows you to adjust the value for BLUE color model.

  • Page 41: 7� Exit Menu

    B350GT3 & X370GT3 7� Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Discard Changes and Exit Abandon all changes made during the current session and exit setup.

This manual is also suitable for:

X370gt3A320mh proA320md pro

Table of Contents