Biostar TPOWER X58 Setup Manual page 27

Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main Advanced
Over-Clocking Navigator Setting
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Current QPI Frequency
Current Memory Frequency
Current Uncore Frequency
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
QPI Links Speed
QPI Frequency
Uncore Frequency
DRAM Frequency
Command Rate
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Confi guration
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Main Advanced
Over-Clocking Navigator Setting
Over-Clocking Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Current QPI Frequency
Current Memory Frequency
Current Uncore Frequency
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
QPI Links Speed
QPI Frequency
Uncore Frequency
DRAM Frequency
Command Rate
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Intel(R) SpeedStep(tm) Tech
This item allows you to enable SpeedStep technology for better power
saving. SpeedStep is a technology built into some Intel processors that
allows the clock speed of the processor to be dynamically changed by
software.
Ratio CMOS Setting
This item allows you to set the CPU ratio frequency. This item is
adjustable only when SpeedStep Tech is set to Disabled.
CPU Frequency Setting
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
TPower X58/TPower X58A
BIOS SETUP UTILITY
PCIPnP Boot Chipset
[Normal]
[V6-Tech Engine]
:
:
Options
:
Normal
[Enabled]
Automate OverClock
[24]
Manual OverClock
[133]
[Full-Speed]
[Auto]
[Auto]
[Auto]
[Auto]
↓
BIOS SETUP UTILITY
PCIPnP Boot
Chipset
[Manual OverClock]
[V6-Tech Engine]
:
:
:
[Enabled]
[24]
[133]
[Full-Speed]
[Auto]
[Auto]
[Auto]
[Auto]
O.N.E Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
Exit
ESC
O.N.E Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
25