ACRONIS TRUE IMAGE 9.1 - SERVER FOR WINDOWS User Manual page 90

/restore_security:[on |
off]
/original_date:[on | off]
list
/filename:[file_name]
explore
/partition:[partition
number]
/letter
unplug
/letter:X
/letter:all
asz_create
/harddisk:X
/partition:[partition
number]
/size:[ASZ size in
sectors]
/asz_activate
asz_activate
/password:[password]
90
Specifies whether to restore files' security attributes (default) or the
files will inherit the security settings of the folder where they will be
restored.
Specifies whether to restore files' original date and time from the
archive or assign the current date and time to the restored files. If
not specified, the current date is assigned.
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
deploy /partition
image by its physical number, use
image> /target_partition:<physical number of the target
keys. For the above example, to restore partition 2-5
partition>
to its original place use:
/partition:2-2 /target partition:2-5
Specifies a list of partitions to be mounted as virtual drives. Without
this option, all partitions stored in the image will be mounted.
To obtain the partition number for this option, list the image
contents with the
/list/filename
from the Idx column.
Assigns letters to the mounted drives. This option is used with
option only.
/partition
Specifies the virtual disk to be disconnected by letter.
Disconnects all virtual drives.
Specifies the hard disk number where the Acronis Secure Zone will
be created.
Specifies partitions from which free space will be taken for Acronis
Secure Zone.
Sets the Acronis Secure Zone size (in sectors). If not specified, is
set as an average between the maximal (using unallocated space
and free space on all the listed partitions) and minimal values.
Activates the Acronis Startup Recovery Manager. The option will not
take effect if the system partition is resized during Acronis Secure
Zone creation. In that case, use the separate
command.
Sets a password for the Acronis Secure Zone.
command cannot find a partition in the
/partition:<number in the
.
command and use the number
Copyright © Acronis, Inc., 2000-2007
/asz_activate